The IS200STCIH6A is a printed circuit board (PCB) with many different components. On the left and right sides of the board are two large nickel-sized factory drill holes. There are also two factory drilled reinforcement terminal holes in the lower left and right corners of the board. Next to the bottom hole are two terminal strips with numerical markings.

The top is labeled 1-51 and contains only odd numbers, while the bottom is labeled 2-52 and contains all even numbers. The top center edge of the board has an RS-232 37-pin female port. The board’s part number label is located in the lower right corner of the board, between the corner and the plant drill hole. There is a white 3-pin jumper just above the top terminal board on the left side of the board. The PCB also contains 2 transistors, 91 resistors, 27 diodes and 24 capacitors.

IS200STCIH6A is a PCB and should be handled with care. Anti-static procedures should be implemented to prevent any type of damage to the board due to the build-up and release of static electricity. The board should be kept in an anti-static bag or box until it can be installed. When installing the IS200STCIH6A, wear an ESD wrist strap. To help with installation, it is recommended to note down the wiring and cable locations on the old board to be replaced.