Tag: DS200DCFBG1BGB

The DS200DCFBG1B is a power supply board manufactured by General Electric for the Mark V board series. AC2000, CB2000, DC2000, FC2000, ME2000 and EX2000 series machines can install the board in the drive. When installed, the card provides control level power and enclosure fan power to the featured Mark V Series automatic driver assembly. The DS200DCFBG1B power board product belongs to GE’s Mark V series, a legacy series from GE as it is no longer actively produced by its original retailers. Although the Mark V is believed to be the last in the GE Mark product line to feature the patented Speedtronic control system technology in its various products. Although the DS200DCFBG1B printed circuit board itself exists as a power board, it is not the original GE product in which this feature exists in the Mark V turbine control system family; This will be a DS200DCFBG1B parent printed circuit board that lacks this DS200DCFBG1B product Class B feature product revision.

Hardware tips and specifications

This DS200DCFBG1B printed circuit board, or PCB for short, comes with its own set of hardware component inclusions and specifications that introduce its intended Mark V Series functionality. Voltages rated between 38 and 115 VAC can be supplied directly to the board via a control power transformer. The frequency of the board depends on the input voltage, but ranges from 0 to 500 kHz. The board has a number of circuits that are used to power the board and the mounted drivers. DS200DCFBG1B is composed of motor excitation power supply, driver, AC/DC monitoring and control level power supply circuit. Twelve jumpers and seven DIP switches on the board provide users with configurable system options; Fuse switch diagnostics are demonstrated using two leds and a neon indicator light on the board. Any jumpers on this DS200DCFBG1B product substrate will come with a JP factory printed name label and, for DIP switches, a SW label. Three protective fuses prevent power outages. The DS200DCFBG1B can monitor voltage using five test points integrated on the board. Similar to the fuse of the DS200DCFBG1B device, the DS200DCFBG1B product utilizes a specific series of connectors to connect to other Mark V Series products. The DS200DCFBG1B power board uses a total of 18 plug connectors and 9 additional pin connectors with the various functions listed in the DS200DCFBG1B data sheet provided above. The purpose of the DS200DCFBG1B board’s three built-in LED indicators is detailed in the original DS200DCFBG1B instruction manual attached above, each with its own factory-printed naming label. The LED diagnostic indicators included in the DS200DCFBG1B PCB assembly include:

CR51 FU2 DC Voltage Regulator status LED
CR55 FU3 DC Voltage Regulator status LED
LT1 FU1 AC line status LED

The CR51 and CR55 LED diagnostic indicators in the external components of the DS200DCFBG1B power supply board are present as basic red LED status indicators, while the LT1 label LED diagnostic indicator of the DS200DCFBG1B printed circuit board is truly present in neon form. These LED indicators are named by their factory-printed naming label and their combination of features relative to the DS200DCFBG1B power board and its larger Mark V Series automatic driver assembly. In addition, a total of five test points are available for the common Mark V Series component version inherent to the DS200SDCIG1A product. Each of these test points is included to identify specific values associated with the voltage signal, the common end of the DS200SDCIG1A board, or the state of the ACCT signal. Before making a final purchase decision on this DS200DCFBG1B printed circuit board, it is important to be aware that the performance specifications and dimensions it originally introduced have been affected by its insertion into the B-feature product. The installation and storage parameters provided by the manufacturer DS200DCFBG1B and installed drivers should be followed. These will prevent any accidental or preventable damage to both units. This DS200DCFBG1B product belongs to the first Mark V Turbine Control System family product group and can be identified as the only Mark V Series group available for DCFB products. For complete guidance on circuit board wiring and mounting boards, refer to the device’s manual and data sheet. Initially, technical support for the board and the Mark V series was provided by manufacturer General Electric. AX Control’s friendly and trusted sales staff can help you with all your automation needs. For prices for current availability and for DS200DCFBG1B and other parts, please contact our office by phone or email.

FAQ about DS200DCFBG1B
Why is DS200DCFBG1B powered?
The DS200DCFBG1B provides control level power for the driver and 115 VAC power for the case fan.
What is the function of the attenuation circuit on DS200DCFBG1B?
The DS200DCFBG1B includes a motor voltage attenuation circuit. This circuit on the DS200DCFBG1B provides an analog representation of the mtor voltage. The attenuation circuit on the DS200DCFBG1B is offset at 2.5 volts and can vary between 0-5V depending on the motor voltage.
Which drive applications is the DS200DCFBG1B mainly used for?

The DS200DCFBG1B is used in a variety of drive applications. DS200DCFBG1B is used for: DC2000, CB2000, EX2000, FC2000, GF2000, ME2000 and AC2000. The EX2000 uses the DS200DCFBG1B for a different purpose than the drive.